Shimano Hollowtech 2 triple 3mm spacer

Private Small Ads only. Dealers, traders or commercials will be deleted.
tooley92
Posts: 1302
Joined: 22 Jun 2007, 9:49am
Location: West Yorkshire

Shimano Hollowtech 2 triple 3mm spacer

Postby tooley92 » 12 Jun 2019, 7:51pm

I’ve managed to loose the 3mm spacer from my Ultegra 6603 triple chain set, it’s the one that goes between the bottom bracket and the non drive side crank arm.

Does anyone have one that they’re willing to part with?
Remember folks 'A pessimist is just an optimist with experience!'

freeflow
Posts: 1184
Joined: 29 Aug 2011, 1:54pm

Re: Shimano Hollowtech 2 triple 3mm spacer

Postby freeflow » 12 Jun 2019, 10:19pm

£3.99 from an online retailer near you. But beware. If setup correctly the washer has a separate rubber seal on the side that goes against the bearing cover. You might find this washer fitted incorrectly to the lh crank.

tooley92
Posts: 1302
Joined: 22 Jun 2007, 9:49am
Location: West Yorkshire

Re: Shimano Hollowtech 2 triple 3mm spacer

Postby tooley92 » 13 Jun 2019, 9:54pm

Thanks, I pulled the trigger on the correct 6603 one.
Remember folks 'A pessimist is just an optimist with experience!'

freeflow
Posts: 1184
Joined: 29 Aug 2011, 1:54pm

Re: Shimano Hollowtech 2 triple 3mm spacer

Postby freeflow » 14 Jun 2019, 12:11am

If you buy just the spacer it won't come with the relevant washer. I strongly suggest you look at the Shimano technical doc for your 6603 chainset to check you have the correct bits assembled in the correct order