Claud Butler Regent Touring - component dimension question

[Willieg]

Hi I wonder if someone could help dose anyone know what the seat post and fork tube diameter is on a late claud butler regent is please, it’s a late model gun metal grey if that’s any help.

[Brucey]

if the headset Is threadless the steerer is almost certainly 1-1/8" diameter. The seat pin is best measured if you can't find the size either written in the specifications or on the lower part of the seat pin itself. Seat pins come in diameter increments of 0.2mm.

cheers

[Willieg]

Hi many thanks for the info unfortunately I’m stuck abroad at the moment, if I was home I could measure it my self, I was hoping someone could help, as want to order some up grade parts while I’m away thanks anyway, best regards Will


I'm a trendy consumer. Just look at my iPad using hovercraft full of eels.

[pwa]

Hi many thanks for the info unfortunately I’m stuck abroad at the moment, if I was home I could measure it my self, I was hoping someone could help, as want to order some up grade parts while I’m away thanks anyway, best regards Will


I'm a trendy consumer. Just look at my iPad using hovercraft full of eels.

No need to rush. I ordered a new chain from Spa Cycles a couple of days ago and it arrived this morning. It's now on the bike and bench tested. Your best bet with the seatpin is to look for writing on the old one. 27.2 seems likely, but it could easily be something else.

[Willieg]

Ok thanks....


I'm a trendy consumer. Just look at my iPad using hovercraft full of eels.

[Willieg]

Can anyone tell me the diameter of the steerer tube of say a 2011 Claud butler Regent any help would be appreciated


I'm a trendy consumer. Just look at my wobbly bog brush using hovercraft full of eels

[Brucey]

as per my earlier reply?

[Willieg]

Ok thanks


I'm a trendy consumer. Just look at my wobbly bog brush using hovercraft full of eels