Installing a seat in a Burley Solo trailer
Posted: 26 Dec 2021, 4:33pm
I had to remove the seat from our 2018 Burley Solo trailer for cleaning. Of course now I can’t remember how to get it back again.
Hoping someone has some experience or has one they can take a look at.
The eyelets on the tabs at the back of the horizontal part of the seat don’t seem to stretch far enough apart to be bolted to the holes in the bars of the frame. Is this just an incredibly tight fit? Or have I shrunk the seat when washing it (I didn’t use a hot wash!).
There is also a long strap with eyelets in each end. I thought it went between the same bolts that hold the back of the seat but it’s slightly longer than the seat is wide and the wearing of the eyelets on the seat suggest they went directly against the round bars.
Hoping someone has some experience or has one they can take a look at.
The eyelets on the tabs at the back of the horizontal part of the seat don’t seem to stretch far enough apart to be bolted to the holes in the bars of the frame. Is this just an incredibly tight fit? Or have I shrunk the seat when washing it (I didn’t use a hot wash!).
There is also a long strap with eyelets in each end. I thought it went between the same bolts that hold the back of the seat but it’s slightly longer than the seat is wide and the wearing of the eyelets on the seat suggest they went directly against the round bars.