Silca Track Pump spares

[Brucey]

do you mean at the top of the barrel? If so maybe a couple of holes and self-tapping screws from the side might help?

Or have I misunderstood what you mean?

cheers

[mattsccm]

Mines at the the top of the barrel.

[PaulCumbria]

Thanks for the replies - self tapping screws are the obvious answer - too obvious for me to think of ! As for those 'rubbish' leather washers - I found they need thoroughly softening up with lots of grease before they start to work - once they do start to work, then the air pressure helps to shape them correctly.

[mattsccm]

I'll bring this back to life again!
finally found leather washers at Winstanleys .
Now the white hard plastic plunger that supports the main washer at the bottom of the rod has crack.
Any ideas?

[Brucey]

could you put a couple of penny washers behind the plastic piece, perhaps?

cheers

[mattsccm]

Maybe<
Its cracked up the side.
Just thought as I type. I wonder is the same thing would work in metal. That I have!

[greyingbeard]

SJS have all this stuff for lots of makes

[Brucey]

indeed they do.... but they don't presently (or for the last couple of years) have

- 28mm silca pump washers

and they have never had

- silca pump pistons (as needed by Mattsccm)

If anyone needs a leather washer to fit a 28mm silca pump, I have a small quantity of them.

cheers

[Cyril]

Am looking for a 28mm Leather washer for a Silca track pump. Have you any still available as you posted in July 2015? If so would be interested. Here's hoping with everything crossed.

[padavison]

If anyone needs a leather washer to fit a 28mm silca pump, I have a small quantity of them.
cheers

I am also interested in said washer, if you have any left. Would be most grateful. Surely there's sufficient demand for a UK supplier to hold some stock.
Thanks